User Manual Q&AAnswer
Mar 18, 2025 - 02:08 AM
To disassemble the Lenovo T23i-30 LCD Monitor, follow these steps:
1. Ensure that all power connectors are removed and that the monitor is powered off.
2. Prepare a soft cloth and sponge as a working platform to place the LCD monitor horizontally.
3. Carefully hold the LCD monitor by the sides and avoid touching or pressing the panel directly.
4. Select the appropriate tools for disassembly, including a Phillips screwdriver (#2), spacer screwdriver, C/D disassembly tool, and gloves or a soft cloth.
5. Place the monitor on a flat surface, preferably with a pe bag underneath.
6. Push the button to release the stand.
7. Remove the four screws using a screwdriver (#2).
8. Use the C/D disassembly tool to release the rear cover hook from the disassemble hole on the bottom.
9. Remove all tape and foil.
10. Remove the chassis xxxx using a screwdriver (#2).
11. Release the power PCB and keypad PCB from the middle frame.
12. Unplug the light bar line and LVDS line.
13. Remove the middle frame.
14. Remove the acetate tape.
15. Take out the mylar sheet from the main chassis.
16. Remove all screws using a screwdriver (#2).
17. Take out the PCB and peel off all gasket and mylar.
Please note that disassembling the monitor requires technical expertise and should only be done by qualified individuals. It is recommended to refer to the Lenovo T23i-30 Simplified Service User Manual for detailed instructions and diagrams.
Add New Comment