User Manual Q&AAnswer
Mar 18, 2025 - 01:56 AM
To program the One For All URC7945 remote control to work with your TV, source device, and audio device, please follow the steps below:
1. Turn on the device you want to program (e.g., TV).
2. Press and hold the MAGIC key until the light indicator stays on.
3. Enter the 3-digit code for your device using the numeric keypad. You can find the codes in the code list provided in the user manual or on the One For All website.
4. Release the MAGIC key. The light indicator will turn off if the code was entered correctly.
5. Test the remote control by pressing the POWER key. If the device turns off, the programming was successful. If not, repeat steps 1-4 with a different code.
Note: If your device is not listed in the code list, you can perform a code search using the following steps:
1. Turn on the device you want to program (e.g., TV).
2. Press and hold the MAGIC key until the light indicator stays on.
3. Press the device key (e.g., TV) once.
4. Press and release the POWER key repeatedly until the device turns off. Each time you press the POWER key, the remote control will send a different code to the device.
5. Once the device turns off, press the OK key to save the code.
Repeat these steps for your source device and audio device, using the respective device keys (e.g., DVD, AUX) instead of the TV key.
If you encounter any issues or need further assistance, please refer to the detailed instructions in the One For All URC7945 user manual or visit the One For All website for additional support.
Add New Comment