Answer

Mar 18, 2025 - 01:32 AM
To adjust the detection range and brightness ratio using the , follow these steps:
1. Press the LEFT button on the remote control.
2. Use the toggle function to set the distance range of the sensor controlled by the remote control.
3. Press the LEFT button again to access the detection range setting.
4. Use the LEFT button to cycle through the available options: 25%, 50%, 75%, and 100%.
5. Press the LEFT button again to access the preset brightness setting.
6. Use the LEFT button to cycle through the available options: 10%, 20%, 30%, and 50%.
Note: The detection range and brightness ratio can be adjusted separately.
Please refer to the V-TAC SKU-11361 Remote Control for Highbay Microwave Sensor instruction manual for more detailed information and additional functions.
Add New Comment