Answer

Mar 17, 2025 - 09:59 AM
To install the , follow these steps:
1. Start by gathering all the necessary components listed in the product overview section of the manual.
2. Begin the installation by attaching the cap xxxx (item 1) using the lock washer (item 2) to secure it in place.
3. Next, assemble the hammer case assembly (item 3) by combining the components 21012 and 01872. Make sure to include the O-ring (item 4) specific to the model IW24360.
4. Install the bushing (item 5) and the additional bushing (item 21012) for model IW24360.
5. Insert the hammer pin (item 6) and attach the anvil (item 7) to the hammer frame assembly (item 8). This assembly includes two hammer pins (item 09695).
6. Place the thrust washer (item 9) and the thrust bearing (item 10) onto the hammer assembly (item 11).
7. Secure the hammer assembly (item 11) to the hammer frame assembly (item 8) using the cap xxxx (item 12).
8. Attach the assist handle (item 13) to the impact wrench.
9. Apply the caution decals (items 14-19) and other necessary tags (items 16-22) to the impact wrench.
10. For model IW24160 and IW2416001, install the impact mechanism assembly (item 23). For model IW24360, install the underwater impact mechanism assembly (item 24).
11. If required, use the seal kit (item 25) to replace any seals.
For more detailed instructions and illustrations, refer to the IW24 Impact Wrench Installation Guide provided by STANLEY.
Add New Comment