User Manual Q&AAnswer
Mar 17, 2025 - 09:54 AM
The installation process for the STANLEY DS06 Diamond Chain Saw involves assembling various parts and components. Here is a step-by-step guide on how to install the chain saw:
1. Start by gathering all the necessary parts and components listed in the parts list provided in the manual.
2. Begin the installation by attaching the HSHCS 10-24 UNC ´ 1-1/4 screws (part no. 00753) to the designated locations. These screws are used to secure various parts together.
3. Install the name tag (part no. 73659 for 5-GPM models or 74806 for 8-GPM models) to the appropriate location on the chain saw.
4. Attach the circuit decal (part no. 11207 for 8-GPM models or 11206 for 5-GPM models) to the designated area on the chain saw.
5. Assemble the rear gear housing assembly (part no. 07652 for 8-GPM models or 07834 for 5-GPM models) by including items 5-6 as indicated in the manual.
6. Install the dowel pins (part no. 00289) and bushings (part no. 04041) to their respective locations.
7. Attach the O-ring (part no. 00020) to the chain saw.
8. Install the idler shaft (part no. 07612) to the designated area.
9. Insert the pivot pin (part no. 32190) to its designated location.
10. Attach the pipe plug (part no. 00961) to the chain saw.
11. Install the hand guard spacer (part no. 73583) to the appropriate area.
12. Attach the drive gear (part no. 04106 for 8-GPM models or 07832 for 5-GPM models) to the chain saw.
13. Install the on/off valve (part no. 32207) to its designated location.
14. Attach the O-ring (part no. 07626) to the chain saw.
15. Install the spring washer (part no. 07609) to the appropriate area.
16. Attach the spring (part no. 34119) to the chain saw.
17. Install the retaining ring (part no. 04512) to its designated location.
18. Attach the plug button (part no. 07625) to the chain saw.
19. Insert the roll pins (part no. 17668) to their respective locations.
20. Install the valve handle assembly (part no. 73656) by including items 6, 31, and 66 as indicated in the manual.
21. Attach the O-ring (part no. 01605) to the chain saw.
22. Install the pigtail hose assembly (part no. 01652) to the appropriate area.
23. Attach the male coupler (part no. 03973) and female coupler (part no. 03972) to their respective locations.
24. Install the water hose assembly (part no. 33443) to the designated area.
25. Attach the trigger (part no. 58879) to the chain saw.
26. Install the spring (part no. 07602) to its designated location.
27. Attach the safety catch (part no. 34105) to the appropriate area.
28. Install the stud (part no. 32197) to its designated location.
29. Attach the roll pin (part no. 00072) to the chain saw.
30. Install the O-rings (part no. 07627 and 00074) to their respective locations.
31. Attach the self-locking retaining ring (part no. 33488) to the chain saw.
32. Install the water valve sleeve (part no. 58970) to the appropriate area.
33. Attach the O-ring (part no. 01403) to the chain saw.
34. Install the pin (part no. 33380) to its designated location.
35. Attach the steel ball (part no. 36259) to the chain saw.
36. Install the spring (part no. 32188) to its designated location.
37. Attach the O-ring (part no. 04052) to the chain saw.
38. Install the seal cap (part no. 32189) to the appropriate area.
39. Attach the CE decal (part no. 28323) to the chain saw.
40. Install the seal spacer (part no. 38898) to its designated location.
41. Attach the sprocket (part no. 09098) to the chain saw.
42. Install the washer (part no. 41765) to its designated location.
43. Attach the chain guard (part no. 73658) to the appropriate area.
44. Install the nuts (part no. 32203) to their respective locations.
45. Insert the cord stock (part no. 35181) to the designated area.
46. Install the motor shaft (part no. 43690) according to the serial number break indicated in item 60.
47. Attach the needle rollers (part no. 04044) to the chain saw.
48. Install the HSHCS 5/16 -18 UNC ´ 3/4 xxxx (part no. 02688) to its designated location.
49. Attach the O-ring (part no. 60804) to the chain saw.
50. Install the seal backup washer (part no. 19215) to the appropriate area.
51. Attach the sprocket adapter (part
Add New Comment