User Manual Q&AAnswer
Mar 17, 2025 - 09:50 AM
To clean the boiling chamber of the PURE WATER 6567 Mini-Classic Water Purification System, follow these steps:
1. Turn the power switch to the OFF position.
2. Allow the unit to cool for 30 minutes from the end of the distillation cycle.
3. Carefully remove the boiling chamber from the unit. Caution: The boiling chamber will be hot, so be careful to avoid burns.
4. Remove the boiling chamber lid.
5. Drain any residual water inside the boiling chamber.
6. Fill the boiling chamber to the water level indicator with tap water.
7. Add Lumen™ Cleaner (stock #6603) to the boiling chamber according to the instructions on the label. Note: Do not replace the boiling chamber back into the unit during the cleaning process and do not operate the unit with the Lumen Cleaner in the boiling chamber.
8. Clean the exterior of the unit using Stainless Steel Cleaner & Polish (stock #6606) following the instructions provided.
9. Rinse the boiling chamber thoroughly with tap water to remove any residue.
10. Reassemble the boiling chamber and lid.
11. Place the boiling chamber back into the unit and ensure it fits snugly.
12. The boiling chamber is now clean and ready for use.
Please refer to the owner's manual for more detailed instructions and safety precautions.
Add New Comment