User Manual Q&AAnswer
Mar 17, 2025 - 09:48 AM
To install the RACO 906C Duplex-Toggle Exposed Work Cover, please follow the steps below:
1. Ensure that the power to the electrical box is turned off before starting the installation process.
2. Remove the existing cover from the electrical box by unscrewing the screws that hold it in place.
3. Take the RACO 906C Duplex-Toggle Exposed Work Cover and align it with the electrical box, ensuring that the toggle switches and duplex outlets align with the corresponding openings on the cover.
4. Insert the screws provided with the cover through the mounting holes on the cover and into the threaded holes on the electrical box. Tighten the screws securely, but be careful not to overtighten and damage the cover or electrical box.
5. Once the cover is securely attached, you can turn the power back on and test the functionality of the toggle switches and duplex outlets.
Please note that these instructions are a general guideline, and it is always recommended to refer to the specific instructions provided with the product or consult a professional electrician if you are unsure about any aspect of the installation process.
Add New Comment