User Manual Q&AAnswer
Mar 17, 2025 - 09:21 AM
To connect the NexiGo NG17FG Portable Display to your computer, follow these steps:
1. Ensure that the interface of your computer is a full-function Type-C/HDMI 2.0/DP 1.2 or above for maximum brightness and 1080P@144Hz display.
2. Use the provided wall charger to power the display.
3. Connect the display to your computer using the appropriate cable:
- If your computer has a full-function USB Type-C port, connect the display to the USB Type-C port.
- If your computer has an HDMI port, connect the display to the HDMI port.
4. Adjust the display brightness and volume as needed on your computer.
Note: If your computer's battery drops below 30%, you will need to connect an external power supply for the monitor to function properly. When the battery is above 30%, the device will power the display and activate the energy-saving mode on the monitor, setting the brightness to low.
For more detailed instructions and troubleshooting, refer to the user manual provided with the NexiGo NG17FG Portable Display.
Add New Comment