User Manual Q&AAnswer
Mar 17, 2025 - 08:54 AM
To install the grass catcher on the TEXAS MPX2000 Solo Lawn Aerators, follow these steps:
1. Insert the bracing into the grass bag.
2. Attach the grass bag onto the bracing by clicking and fitting it into place.
3. Lift the safety guard on the lawn aerator.
4. Make sure the discharge chute is clean and free from debris.
5. Fit the fully assembled grass catcher onto the location points at the rear of the deck.
6. Let the safety guard fall onto the top of the grass catcher to lock it in place.
Note: If you want to use the lawn aerator without the grass catcher, make sure that the safety guard goes down and blocks the discharge chute.
For more detailed instructions and illustrations, please refer to illustrations 7-8 in the TEXAS MPX2000 Solo Lawn Aerators User Manual.
Add New Comment