Answer

Mar 17, 2025 - 08:50 AM
To install the Oras 431716 Frost Proof Valve, you will need the following tools:
1. Adjustable wrench
2. Pipe cutter or hacksaw
3. Pipe thread sealant or plumber's tape
4. Teflon tape
5. Screwdriver
Here is a step-by-step guide to installing the Oras 431716 Frost Proof Valve:
1. Shut off the water supply to the existing outdoor faucet.
2. Remove the old faucet by unscrewing it from the pipe.
3. Measure and cut the pipe to the desired length, ensuring that it extends far enough outside the wall to prevent freezing.
4. Clean the pipe ends and remove any burrs.
5. Apply pipe thread sealant or plumber's tape to the male threads of the valve.
6. Insert the valve into the pipe and tighten it using an adjustable wrench.
7. Wrap Teflon tape around the male threads of the outdoor faucet.
8. xxxx the outdoor faucet onto the valve and tighten it using an adjustable wrench.
9. Connect the water supply pipe to the valve using a compression fitting or soldering, depending on your plumbing system.
10. Turn on the water supply and check for any leaks.
11. If there are no leaks, the installation is complete.
For more detailed instructions and illustrations, please refer to the Oras 431716 Frost Proof Valve Installation Guide provided by the manufacturer.
Add New Comment