User Manual Q&AAnswer
Mar 17, 2025 - 05:04 AM
To connect the ANGUSTOS ACV2 Video Wall Controller to your computer, you will need to follow these steps:
1. Make sure the ACV2-0812A Chassis is powered on and the front LED lights are lit.
2. Connect the AC Power module to the chassis and turn on the power switch.
3. Connect your computer to the Video Wall Controller using an HDMI cable. The HDMI input ports are located on the chassis.
4. Connect the Video Wall Controller to your network using the LAN TCP/IP - RJ45 interface.
5. If you need to control the Video Wall Controller via RS-232, connect the RS-232 In/Out (COM PORT) to your computer.
Once the hardware connections are made, you can proceed to execute the software file VWC_Vxxx.exe to run the program. Double-click the application program to open the control software interface. The default username and password are both "admin".
In the control software interface, go to the "Setting" menu and choose the correct LAN card connected to the chassis. Click on the search (magnifier) icon to automatically find the controller IP in the same subnet. Select the IP and press OK to establish the connection.
If you need to connect via the control port, click on the "Connect" sub-menu in the "Setting" menu. A dialog box will appear where you can select the corresponding COM port and click "Set up" to connect.
Please refer to the ANGUSTOS ACV2 Video Wall Controller User Manual for more detailed instructions and illustrations.
Add New Comment