User Manual Q&AAnswer
Mar 17, 2025 - 04:59 AM
To connect the COBALT CS-5 controller to your smartphone, you will need to follow these steps:
1. Connect the controller to a power supply.
2. Confirm that the pilot lamp on the controller is flashing quickly (2 flashes per second). If it is not, you can enter this state by either long-pressing the "SET" key until the pilot lamp flashes quickly or by power cycling the controller and pressing the ON button on the linked remote until the LED strip blinks 3 times.
3. Connect your smartphone to the WiFi network.
4. Open the TUYA Smart Life app on your smartphone and click the "+" button at the upper right corner of the page. The app will automatically find the new device when the pilot lamp on the controller is flashing red.
5. After successful network configuration, the added device will be displayed on the homepage of the app.
6. Click on the device you want to control to enter the control interface.
Note: Make sure to select the appropriate output mode (as mentioned in the Parameters section of the manual) when using the TUYA Smart Life app. Keep in mind that the app may undergo updates and changes, so there might be slight differences in the software interface compared to the manual.
Please refer to the manual for additional safety precautions and usage instructions for the COBALT CS-5 controller.
Add New Comment