User Manual Q&AAnswer
Mar 17, 2025 - 04:48 AM
To fill the tank with water and treat it properly, follow these steps:
1. Remove the Rubber Tank Plug from the top of the tank.
2. Place a large bucket of water next to the rower.
3. Position the siphon with the rigid hose in the bucket and the flexible hose into the tank.
4. Begin filling the tank by squeezing the siphon. Use the Level Gauge Decal on the side of the tank to measure the volume of water.
5. Do not overfill the tank. The resistance changes with the filling level, but it is recommended to fill it to a height of L1-L3 on the Level Gauge Decal.
6. Once filling and water treatment procedures are complete, ensure that the tank plug is replaced.
Note: Do not use any treatment tablets other than those supplied with your rower. Changing the tank water is recommended if discoloration appears, and additional Water Treatment Tablets may be required.
Please refer to the instruction manual for more detailed information and safety precautions regarding filling and treating the tank.
Add New Comment