User Manual Q&AAnswer
Mar 17, 2025 - 04:35 AM
To install and power the MEDI GUARD MBR-30M Medical Mobile Cooler, please follow the instructions below:
1. Installation: The MBR-30M can be powered with a 12V DC power supply or a 220V AC 50/60Hz power supply.
- For DC use: Connect the cooler to a battery-powered motor vehicle using the provided 12V DC power line.
- For AC use: The cooler is set for standard operation with 240V AC. If you are using a 100V AC power supply, you need to operate a selector located on the power supply. Make sure the socket has an efficient earth contract and adequate capacity.
2. Powering the Cooler:
- 220V AC 50/60Hz: Push the power cable socket into the appliance socket and plug the mains plug into the electric socket. Push the main switch (O/I) to the "I" position to start the cooler.
- 12V DC: Push the power cable socket into the appliance socket and connect the cooler to the 12V DC power supply. Push the main switch (O/I) to the "I" position to start the cooler.
Please refer to the manual for more detailed instructions and safety precautions.
Add New Comment