User Manual Q&AAnswer
Mar 17, 2025 - 04:33 AM
To change the drill bit on the HAMMERHEAD HAHD075 7.5 AMP Hammer Drill, follow these steps:
1. Ensure that the hammer drill is switched off and unplugged from the power source.
2. Firmly grasp the rear part of the keyless chuck with one hand.
3. With your other hand, turn the front part of the chuck counterclockwise to loosen it and open the chuck jaws.
4. Insert the desired drill bit into the chuck, making sure it is centered and inserted deeply.
5. Hold the rear part of the chuck with one hand and turn the front part clockwise to tighten the chuck jaws securely around the drill bit.
6. Ensure that the drill bit is properly secured by giving it a slight tug.
7. You can now proceed to use the hammer drill with the new drill bit.
Refer to the "Installing Bits" section in the user manual for more detailed instructions and safety precautions.
Add New Comment