User Manual Q&AAnswer
Mar 17, 2025 - 04:23 AM
Installation of the AXEN AXSPS-90 Plastic Swimming Pool Heat Pump Water Heater requires careful attention to detail and adherence to safety guidelines. Here is a step-by-step guide to help you with the installation process:
1. Choose a suitable location: Install the heat pump on a flat, horizontal, and stable surface. Make sure there is enough space for proper ventilation and access to the temperature controller. Avoid placing the unit under a tree or in an area prone to water or mud exposure.
2. Check the electrical requirements: Ensure that the electrical supply matches the specifications indicated on the appliance. Use the provided cable glands and grommets to route the cables. It is recommended to consult an electrician to determine the exact cable size required for your pool installation.
3. Connect the water supply: The heat pump should be connected to a filtration circuit with a bypass. Install the bypass after the pump and filter. The bypass typically consists of three valves, allowing you to regulate the water flow and isolate the heat pump for maintenance without cutting off the flow of filtered water. If your installation includes a water treatment system, install the bypass before the water treatment with a non-return valve in between.
4. Complete the electrical connections: Ensure that the power circuit capacity is sufficient and properly connected according to the installation manual. The unit must always have an earthed connection. Avoid using extension cables and have a qualified electrician install a suitable, earthed wall socket if necessary.
5. Perform a trial run: After connecting the water to the pool system, completing the bypass and electrical connections, have a qualified engineer perform a trial run. Ensure that the unit is horizontal and on a firm base. Check for any water leaks or improperly fitted hydraulic couplings. Verify that all installation requirements have been followed.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the AXEN AXSPS-90 Plastic Swimming Pool Heat Pump Water Heater Instruction Manual for detailed installation steps and safety precautions.
Add New Comment