User Manual Q&AAnswer
Mar 17, 2025 - 04:19 AM
To set the power level on the JennAir JIC4530KS induction cooktop, follow these steps:
1. Make sure the cooktop is connected to the power supply and turned on.
2. Within 60 seconds of turning on the cooktop, press and hold the timer "+" button for at least 5 seconds. The display will show a symbol.
3. Use the "+" and "-" buttons to select the desired power level. The available power levels are 4 kW, 6 kW, 7 kW - 9 kW, and 11 kW.
4. Once you have selected the desired power level, press the " " button to confirm your selection.
5. The selected power level will be stored in the memory, even if the power supply is interrupted.
6. To change the power level, turn off the power to the cooktop for at least 60 seconds, then turn it back on and repeat the steps above.
Note: If an error occurs during the setting sequence, the symbol will appear on the display and you will hear a beep. In this case, repeat the operation. If the error persists, contact the After-Sales Service.
Please refer to the user guide for additional information and safety precautions.
Add New Comment