User Manual Q&AAnswer
Mar 17, 2025 - 04:11 AM
To add a fingerprint to the Tuya Luxury Wifi Smart Biometric Lock, follow these steps:
1. Press any key to wake up the system.
2. Press the "1" + "#" key. The blue light of the fingerprint light will flash, and the voice prompt "Please verify the administrator" will be heard.
3. If no fingerprint or password has been entered, use any fingerprint or the default password "123456" to verify. If the verification is successful, the fingerprint entry process will start.
4. The voice prompt "Please start entry" will be heard. Place the finger you want to set at the center of the fingerprint sensor and press it lightly.
5. If the fingerprint data is successfully collected, the green light will flash once, and the voice prompt "Please enter again" will be heard. If the collection fails, the red light will flash once.
6. Repeat the process of touching and pressing the finger for a total of 5 times to collect 5 valid fingerprints.
7. After the 5 collections are completed, the green light will stay on, and the voice prompt "Entry is successful" will be heard. This indicates that the fingerprint has been successfully added.
Note: The first three fingerprints entered are for the administrator.
Add New Comment