User Manual Q&AAnswers
Mar 17, 2025 - 03:22 AM
To charge the battery for the SPYCENTRE1080P ZMax MicroCam, follow these steps:
Locate the Charging Port: The camera will have a micro USB port or a similar charging port (depending on the specific model). You'll need to find this port on the camera.
Use the Provided Charging Cable: The camera usually comes with a USB charging cable. Plug one end of the cable into the camera's charging port.
Connect to a Power Source: Plug the other end of the USB cable into a USB power source, such as a wall charger, a USB port on a computer, or a portable power bank. If it uses a micro USB, you can also use a standard smartphone charger.
Charging Indicator: Some models have an LED indicator that shows the charging status. It might light up red or blink to indicate it's charging, and it may turn green or stop blinking once the battery is fully charged.
Charging Time: Allow the camera to charge fully, which typically takes a few hours (depending on the battery capacity).
Once fully charged, the camera should be ready for use. Always refer to the user manual for any specific details regarding your model.
Mar 17, 2025 - 03:22 AM
To charge the battery of SPYCENTRE 6757 1080P ZMax MicroCam, you need to connect the recorder to a PC or USB power supply using the provided USB to USB cable. It takes approximately 6-8 hours to fully charge the battery. While charging, the orange light will indicate that the device is charging but not recording. Once fully charged, the green light will indicate that the battery is fully charged but not recording. If the orange light is blinking, it means the device is charging and recording. Similarly, a blinking green light indicates that the device is charging complete and recording. If you see a red light, it means there is no card inserted, the card has failed, or the card's memory is full.
Note: Make sure to fully charge the unit and insert an SD card up to 256GB. If you are using a 64GB card or larger, you must format the card through the ZMax 86 Micro Stick for it to record video files.
Add New Comment