User Manual Q&AAnswer
Mar 17, 2025 - 03:17 AM
To start the Husqvarna 345BT Petrol Leaf Blower, follow these steps:
1. Make sure the fuel tank is filled with the correct fuel mixture of gasoline and two-stroke oil.
2. Put the choke control in the closed choke position.
3. Push the air purge bulb multiple times to fill it with fuel.
4. Put the throttle control in the fast idle position.
5. Place the blower on a flat surface and hold it with your left hand while putting your foot on the foot plate.
6. Slowly pull the starter rope handle with your right hand until you feel resistance.
7. Pull the starter rope handle quickly until the engine starts or attempts to start, but no more than 6 times.
8. Gradually move the choke lever to the open position when the engine attempts to start.
9. Let the engine run for 30 seconds.
10. Set the throttle control to idle speed.
11. Push the throttle trigger to adjust the blower speed as needed.
Please refer to the Husqvarna 345BT Petrol Leaf Blower Owner's Manual for more detailed instructions and safety precautions.
Add New Comment