User Manual Q&AAnswer
Mar 17, 2025 - 03:03 AM
To pair the with the Remote headsets, follow these steps:
1. Make sure that both the Master and the Remote headsets are turned off.
2. Press and hold the "+" button and the power button of the Master headset simultaneously until the indicator flashes blue rapidly.
3. While the Master headset is in pairing mode, press and hold the "+" button and the power button of the Remote headset simultaneously.
4. The indicators of the Remote headsets will start to flash slowly in blue light.
5. Press the power button of the Master headset within 10 seconds.
6. The Master and the Remote headsets will be successfully paired, and all the indicators will turn solid blue.
Note: Each Master headset can have a maximum of 4 Remote headsets paired. After successfully pairing with four Remote headsets, the Master headset cannot enter pairing mode again by pressing the power button and the "+" button simultaneously. If you want to re-enable pairing mode, you need to clear the Master headset first.
For more detailed information and troubleshooting, please refer to the Saramonic WiTalk SMH Single-Ear Wireless Headset User Manual.
Add New Comment