How do I install the SHAD 4P System Side Case Racks on my Aprilia Tuareg 660 2022? (SHAD 4P System Side Case Racks Aprilia Tuareg Installation Guide)

Answer

manuals.plus

Mar 17, 2025 - 03:02 AM

To install the SHAD A0TR614P 4P System Side Case Racks on your Aprilia Tuareg 660 2022, please follow the steps below:

1. Ensure that you have all the necessary components included in the package. The package should include the side case racks and the required screws.

2. Before starting the installation, it is important to note that the instructions provided are based on European models. If you have a model from a different continent, please visit the SHAD website (www.shad.es) to check for compatibility.

3. Begin by identifying the left and right side racks. Each rack should be labeled accordingly.

4. Position the left side rack on the left side of the motorcycle's frame, aligning it with the mounting points. Make sure the rack is correctly attached and aligned before proceeding.

5. Insert the screws provided through the mounting points on the rack and into the corresponding holes on the motorcycle's frame. Do not fully tighten the screws at this stage.

6. Repeat the same process for the right side rack on the right side of the motorcycle's frame.

7. Once both racks are attached, ensure that they are aligned properly and securely fastened.

8. Finally, go back and fully tighten all the screws, ensuring that the racks are firmly attached to the motorcycle.

Please note that it is essential to follow the installation instructions provided in the manual carefully. If you encounter any difficulties or have further questions, it is recommended to refer to the SHAD A0TR614P 4P System Side Case Racks installation guide or contact SHAD directly for assistance.