User Manual Q&AAnswer
Mar 17, 2025 - 02:56 AM
To install the easee BPR4W001 Base Charging Pedestal PR 4-Way, please follow the step-by-step instructions provided in the user manual. Here is a summary of the installation process:
1. Safety Instructions:
- The installation should be carried out by an authorized electrician.
- Do not make any changes to components or connecting cables.
- Install the product in a safe location away from explosive atmospheres and flowing water.
- Ensure the product is installed on a permanent location.
- Avoid immersing the product in water or other liquids.
- Protect the product from direct sunlight and extreme weather conditions.
- Keep the product away from strong electromagnetic fields and radio transmitters.
- Do not use extension cords or unapproved adapters.
2. Common Parts:
- The easee BPR4W001 Base Charging Pedestal PR 4-Way comes with common parts that are shared among different configurations.
- The adapter plate is used to attach the foundation of the column to the pedestal.
- The bottom frame, top frame, and top plate are used to assemble the structure of the pedestal.
- The backplates are attached to the sides of the column to hold the chargers.
- The Multi-Way cover is used to cover the remaining sides if installing less than 4 chargers.
3. Assembly Instructions:
- Attach the adapter plate to the foundation using socket head screws.
- Slide the bottom frame over the column and fasten it with rounded head screws.
- Attach the top frame to the top two threads of the column using rounded head screws.
- Cover the top frame with the top plate and fix it with rounded head screws.
- Attach the backplates to the sides perpendicular to the column openings using rounded head screws.
- If installing 4 chargers, attach the last 2 backplates. If installing less than 4 chargers, use the Multi-Way cover.
- Ensure all cables are pulled through the column holes before attaching the backplates.
4. Electrical Connection:
- The easee BPR4W001 Base Charging Pedestal PR 4-Way can be connected via Power Rail.
- The circuit should be RCD protected.
- Multiple charging posts can be connected in series.
5. Wiring:
- Strip the individual wires by 12 mm and use ferrules on flexible conductors.
- Tighten the xxxx terminals with the recommended torque.
- Follow the existing color codes used in the installation.
- Make sure all wires are properly connected and tightened before turning on the power.
Please refer to the complete user manual for detailed instructions, safety precautions, and illustrations. If you have any further questions or need assistance, you can contact Easee Customer Support or refer to their website for additional resources.
Add New Comment