Answer

Mar 17, 2025 - 02:19 AM
Before installing the Lowe's Kraus Regent carpet tiles, it is important to properly prepare the subfloor. Here are the steps to follow:
1. Clean the subfloor: Ensure that the subfloor is clean, dry, and free of dirt, oil, grease, paint, and non-compatible adhesives or coatings. Remove any dust, dirt, debris, and non-compatible adhesive from the surface.
2. Level the subfloor: If there are any cracks or uneven areas on the subfloor, fill them using a Portland-based leveling or patching compound. Use a latex additive instead of water for better bonding properties. Level any existing adhesive trowel ridges by scraping, sanding, or patching to ensure proper adhesive contact.
3. Remove hazardous materials: Do not install the carpet tiles over hazardous materials such as asbestos, resin, or silicate-based curing compounds. Also, avoid using oil or silicate-based sweeping compounds.
4. Test for bond: Perform a bond test by applying a high-quality, pressure-sensitive carpet adhesive and installing a small area of tiles (4 ft. area). Let it set for 24 hours and then check for a good adhesive bond to the floor.
By following these preparation steps, you can ensure a proper and durable installation of the Lowe's Kraus Regent carpet tiles. For more detailed instructions, please refer to the installation guide provided by Lowe's.
Add New Comment