Answer

Mar 17, 2025 - 02:17 AM
To install the PNi L1200W Power Inverter, follow these steps:
1. Check the box contents: Open the package and check if the inverter and all standard accessories are included. If there is any damage or missing accessory, contact your supplier immediately.
2. Choose the installation environment: Keep the inverter in a well-ventilated place, away from water, direct sunlight, dirt, and fog. The operating temperature range is -26°C to 80°C.
3. Ensure safety using distance: Mount the inverter at least 60mm away from any nearby object to avoid overheating and reduce the lifespan.
4. Connect the electric cables: Before connecting the cables, make sure the inverter power button is off. Connect the direct current input cable to the polarity of the battery. Ensure the plugs of the inverter and battery are tightly connected. Connect a load to the power outlet of the inverter. Once all connections are properly done, turn on the inverter. If the green LED lights up, the output voltage is correct, and the device is ready to use.
5. Caution: Do not use the alternating current output to connect the power grid. Do not exceed the rated power of the inverter. For inductive loads, use an inverter 2-3 times its power. Turn off the inverter when starting the car. Keep the inverter well-ventilated, not covered by anything, and away from touching it. Do not connect the inverter to discharged or old batteries.
Please refer to the instruction manual for more detailed information and illustrations on the installation process.
Add New Comment