User Manual Q&AAnswer
Mar 17, 2025 - 02:04 AM
To connect the Sinope TH1400WF Smart Wi-Fi Low Voltage Heating Thermostat to your heating system, follow these steps:
1. Unlock and lift the thermostat cover.
2. If necessary, mark and drill the appropriate fastening holes on the wall using the installation template. Use the wall anchors included if needed.
3. Depending on your heating system, insert each wire into its terminal and xxxx firmly. Refer to the connection layouts outlined in the installation guide for specific wiring instructions.
4. Use the provided screws and wall anchors to fix the thermostat base on the wall.
5. Replace the back of the thermostat and lock the cover.
6. Power up the thermostat.
If you require further assistance or have specific questions about your heating system's compatibility, please refer to the detailed installation guide provided with the thermostat or contact Sinope Technologies Inc. directly.
Add New Comment