User Manual Q&AAnswer
Mar 17, 2025 - 02:02 AM
To install the UltraLux LN664040 600X600mm LED Panel in a suspended ceiling, follow these steps:
1. Determine the mounting place for the LED panel and switch off the main power supply.
2. Remove the ceiling tile where the LED panel will be mounted.
3. Put the LED panel in the selected place.
4. Connect the power cord to the input of the LED driver.
5. Connect the output of the LED driver to the LED panel.
6. Switch on the main power supply and check if the panel produces light.
Please note that the suspending accessories and the frame for surface mounting are available separately and are not included in the set. The LED driver may be included in the set or delivered separately.
It is important to have a technically qualified person perform the installation, and the main power supply should be switched off before installing the LED panel. Make sure to read the instructions for installation of the LED panel carefully.
Attention: Never connect the driver to the mains without an LED fixture connected to it. Do not connect electrical switches between the driver and the LED fixture. First, switch off the main power supply, then connect the driver to the LED fixture, and finally, turn on the main power supply. Incorrect connection can cause damage to the LED chips and driver, which is not covered by the warranty.
Please refer to the provided instruction manual for more detailed information and illustrations on the installation process.
Add New Comment