User Manual Q&AAnswer
Mar 17, 2025 - 01:54 AM
To connect multiple Q-TRAN Scene Dongles to a power supply without exceeding the rated wattage, follow these steps:
1. Ensure that the power supply you are using has a wattage rating that is equal to or higher than the combined wattage of all the connected dongles. Exceeding the power supply's rated wattage can cause damage and is not recommended.
2. Connect each dongle to the power supply individually. Use the supplied #4 screws to securely mount each dongle to the desired surface.
3. Connect the fixtures to the dongles. It is important to note that the fixtures must have a CON6 or CON24 connector to be compatible with the dongles.
4. Once all the dongles and fixtures are connected, plug in the power supply to a power outlet. Ensure that the power supply is not dimmed, as this can affect the performance of the connected dongles.
By following these steps, you can safely connect multiple Q-TRAN Scene Dongles to a power supply without exceeding the rated wattage. If you have any further questions or concerns, please refer to the Q-TRAN Scene Dongle Mounting Installation Guide or contact Q-Tran Inc. directly.
Add New Comment