User Manual Q&AAnswer
Mar 17, 2025 - 01:52 AM
To connect the WyreStorm EXP-EX-80-KVM 80m KVM UTP HDMI Extender Over Ethernet, follow these steps:
1. Ensure that you have downloaded the latest firmware, document version, additional documentation, and configuration tools from the product page on the WyreStorm website.
2. Familiarize yourself with the wiring and connections guidelines provided in the user guide before running or terminating any cables.
3. In the box, you will find the following items:
- 1x EXP-EX-80-KVM Transmitter
- 1x EXP-EX-80-KVM Receiver
- 1x 12V DC 2A Power Supply (US/UK/EU/AU)
- 1x USB Type B to Type A Cable
- 4x Mounting Brackets
4. Refer to the basic wiring diagram provided in the user guide to understand the front and rear panel connections of the transmitter and receiver.
5. Before making any connections, ensure that all wiring for the installation is run and terminated properly to avoid any damage to the equipment.
6. WyreStorm recommends using shielded category cable to minimize signal noise and interference.
7. For HDMI connections, it is recommended to use pre-terminated HDMI cables to ensure accurate connections and optimal performance.
8. Once all the wiring is in place, connect the transmitter and receiver to their respective devices using HDMI and UTP cables.
9. Make sure that the power supply is connected to both the transmitter and receiver.
10. Verify that all connections are secure and not loose.
11. If you encounter any issues with the picture quality, such as snow or a noisy image, check the power supply, HDMI, and UTP connections. Also, ensure that the UTP cable is properly terminated following the EIA568B standard. Additionally, verify that the output resolution of the source and display is supported by the extender.
12. If you are experiencing a failed USB connection or slow transmission rate, ensure that the category cable length is within the required range. For USB HID devices, the distance should be within 80m/260ft, and for USB storage devices, it should be within 60m/200ft.
13. If troubleshooting is required, WyreStorm recommends using a cable tester or connecting the cable to other devices to verify functionality.
Please note that the information provided here is a summary of the user guide. For more detailed instructions and information, refer to the complete user guide provided by WyreStorm.
Add New Comment