Answer

Mar 15, 2025 - 04:03 AM
To install the Electrolux EHG8238BC Built-in Gas Hob, please follow the instructions provided in the user manual that comes with the product. Here is a general guide on how to install the hob:
1. Before installation, ensure that the gas supply is turned off and the electricity is disconnected.
2. Measure and mark the cut-out dimensions on the countertop or surface where the hob will be installed. The cut-out dimensions for this model are 700-745mm in width and 400-445mm in height.
3. Carefully cut the countertop along the marked dimensions, ensuring that the edges are smooth and free from any debris.
4. Place the hob into the cut-out, making sure it fits securely. The dimensions of the hob itself are 800mm in width and 508mm in depth.
5. Connect the gas supply to the hob using a flexible hose or rigid pipe, following local regulations and safety standards. It is recommended to use a qualified gas installer for this step.
6. Connect the hob to the electricity supply, if applicable. Refer to the user manual for specific electrical requirements and instructions.
7. Double-check all connections to ensure they are secure and leak-free.
8. Once the installation is complete, turn on the gas supply and check for any gas leaks using a soapy water solution. If any leaks are detected, immediately turn off the gas supply and rectify the issue before using the hob.
9. Finally, refer to the user manual for instructions on how to properly use and maintain the hob.
Please note that the above steps are a general guide and it is essential to refer to the user manual provided with the product for detailed installation instructions specific to the Electrolux EHG8238BC Built-in Gas Hob.
Add New Comment