Answer

Mar 15, 2025 - 03:59 AM
Installation and mounting instructions for the LeuchtenDirekt 994705 JUPITER LED Ceiling Light 80cm can be found in the instruction manual provided with the product. Here is a step-by-step guide on how to install and mount the ceiling light:
1. Before starting the installation, make sure the power supply is turned off.
2. Determine the desired location for the ceiling light and mark the positions for mounting holes on the ceiling.
3. Drill the necessary holes in the ceiling according to the marked positions.
4. Insert the provided dowels into the drilled holes.
5. Connect the electrical wires from the ceiling to the corresponding wires of the ceiling light. Make sure to follow the correct polarity (live wire to live wire, neutral wire to neutral wire, and earth wire to earth wire).
6. Securely mount the ceiling light to the ceiling using the provided screws and brackets. Ensure that the light is aligned properly.
7. Once the light is securely mounted, turn on the power supply and test the functionality of the ceiling light.
Please note that the above instructions are a general guide and may vary depending on the specific model and design of the LeuchtenDirekt 994705 JUPITER LED Ceiling Light 80cm. It is always recommended to refer to the instruction manual provided with the product for detailed and accurate installation instructions.
Add New Comment