User Manual Q&AAnswer
Mar 15, 2025 - 03:56 AM
Installation and usage instructions for the LeuchtenDirekt 994148 LED Panel Silver 30x30cm square are as follows:
1. Mounting the LED Panel:
a. Ensure that the power supply is switched off before starting the installation.
b. Remove the protective film from the back of the LED panel.
c. Attach the panel to the desired surface using the provided mounting brackets or screws.
d. Make sure the panel is securely fixed to avoid any accidents or damage.
2. Power Connection:
a. Connect the power supply to the LED panel using the provided cables.
b. Ensure that the power supply is compatible with the LED panel's specifications (voltage, current, etc.).
c. Double-check the connections to ensure they are secure and properly insulated.
3. Switching On and Off:
a. Once the LED panel is properly installed and connected to the power supply, you can switch it on using the power switch or control mechanism provided.
b. To switch off the LED panel, use the same power switch or control mechanism.
4. Adjusting Brightness (if applicable):
a. Some LED panels may have adjustable brightness levels. Refer to the product manual or control instructions to determine if this feature is available.
b. If adjustable brightness is supported, follow the instructions provided to increase or decrease the brightness as desired.
5. Maintenance and Cleaning:
a. To clean the LED panel, switch it off and disconnect it from the power supply.
b. Use a soft, lint-free cloth or sponge dampened with water or a mild, non-abrasive cleaning solution to gently wipe the surface of the panel.
c. Avoid using harsh chemicals or abrasive materials that may damage the panel's surface.
Please note that the above instructions are general guidelines. For specific details and safety precautions, it is recommended to refer to the official instruction manual provided by LeuchtenDirekt GmbH.
Add New Comment