User Manual Q&AAnswer
Mar 15, 2025 - 03:55 AM
Installation and mounting instructions for the Neuhaus Lighting Group 270401 FLAT LED Panel in weiß 120x30cm are as follows:
1. Ensure that the power supply is turned off before starting the installation process.
2. Carefully unpack the LED panel and remove any protective packaging.
3. Determine the desired location for mounting the panel. It is recommended to mount it on a solid and flat surface.
4. Mark the positions for the mounting holes on the surface using a pencil or marker. The panel should have at least four mounting points.
5. Drill holes at the marked positions using an appropriate drill bit, taking care to avoid damaging any electrical or plumbing installations behind the surface.
6. Insert the provided wall plugs into the drilled holes.
7. Align the panel with the drilled holes and attach it to the surface using the provided screws. Ensure that the panel is securely fastened.
8. Connect the panel to the power supply. The panel should be connected to a suitable LED driver or transformer, following the electrical wiring regulations of your country.
9. Once the panel is securely mounted and connected to the power supply, turn on the power and test the functionality of the LED panel.
10. If necessary, adjust the panel's position or angle to achieve the desired lighting effect.
Please note that these instructions are a general guide. For specific details and illustrations, please refer to the instruction manual provided with the product. If you encounter any difficulties during the installation process, it is recommended to seek professional assistance or contact the Neuhaus Lighting Group customer service for further support.
Add New Comment