User Manual Q&AAnswer
Mar 15, 2025 - 03:53 AM
To install the LeuchtenDirekt 997155 ASMIN LED Ceiling Light Steel, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before installation, ensure that the power supply is turned off.
2. Remove the existing ceiling light fixture, if any, by unscrewing the screws or releasing the clips that hold it in place.
3. Connect the electrical wires from the ceiling to the corresponding wires of the LeuchtenDirekt 997155 ASMIN LED Ceiling Light Steel. Make sure to match the colors of the wires (e.g., black to black, white to white, etc.). Use wire connectors or terminal blocks to secure the connections.
4. Attach the ceiling light base to the ceiling using the provided screws and anchors. Ensure that it is securely fastened.
5. Carefully attach the LED module to the ceiling light base. Align the pins on the module with the slots on the base and gently push it in until it clicks into place.
6. Once the LED module is securely attached, restore power to the light fixture by turning on the circuit breaker or flipping the switch.
7. Test the LeuchtenDirekt 997155 ASMIN LED Ceiling Light Steel to ensure it is functioning properly.
Please note that this is a general installation guide, and it is always recommended to refer to the specific instructions provided in the manual for your product.
Add New Comment