User Manual Q&AAnswer
Mar 15, 2025 - 03:42 AM
To install the allgood FT9451 Hardware Electromagnetic Overhead Door Closer using the fixing template, please follow the steps outlined in the Fixing Instruction Fl9451 provided by allgood. Here is a general overview of the installation process:
1. Start by ensuring that you have all the necessary tools and equipment for the installation, as mentioned in the manual.
2. Carefully read and understand the Fixing Instruction Fl9451 provided by allgood. It contains detailed information and diagrams specific to the installation of the FT9451 Hardware Electromagnetic Overhead Door Closer.
3. Locate the fixing template provided with the product. The template will help you accurately position and mark the fixing points on the door and frame.
4. Place the fixing template on the door and align it according to the instructions in the manual. Ensure that it is level and centered on the door.
5. Use a pencil or marker to mark the fixing points on the door and frame through the holes in the fixing template. These marks will guide you during the installation process.
6. Remove the fixing template and set it aside.
7. With the marks as a guide, drill the necessary holes on the door and frame using the appropriate drill bit size as specified in the manual.
8. Once the holes are drilled, align the FT9451 Hardware Electromagnetic Overhead Door Closer with the holes and secure it in place using the provided screws or bolts. Refer to the manual for the specific instructions on attaching the closer.
9. After the closer is securely installed, test the functionality of the door closer by opening and closing the door. Make any necessary adjustments as per the manual to ensure smooth operation.
Please note that the above steps are a general overview and it is crucial to refer to the Fixing Instruction Fl9451 provided by allgood for detailed and accurate installation instructions specific to the FT9451 Hardware Electromagnetic Overhead Door Closer.
Add New Comment