How do I pair the transmitter and receiver of the CHORD In-Ear Monitoring System? (CHORD in-Ear Monitoring System Instruction Manual)

Answer

manuals.plus

Mar 15, 2025 - 02:37 AM


To pair the transmitter and receiver of the CHORD IEM58 In-Ear Monitoring System, follow these steps:

1. Ensure that both the transmitter and receiver are fully charged using a standard 5V USB charger with a minimum output of 1A.

2. Press and hold the push button on both the transmitter and receiver for 3 seconds. This will cause the push button to flash blue.

3. When both the transmitter and receiver are flashing blue, they will connect if they are already paired, and the push buttons will change from flashing to solid blue. This indicates that the transmitter is sending audio wirelessly to the receiver.

4. If you want to pair a new transmitter and receiver or remove any previous pairing settings, press and hold the push button on either the transmitter or receiver for 5 seconds. This will cause the push button to flash blue and green at the same time, indicating that it is in pairing mode.

5. When a transmitter and receiver are flashing blue and green together, they will pair automatically, and the LED will change to continuous blue when paired and connected.

Note: The transmitter and receiver may already be paired with each other when bought as a set. Additional receivers (171.899UK) may be bought for multi-listener applications.

For more detailed information and instructions, please refer to the CHORD IEM58 In-Ear Monitoring System Instruction Manual.