User Manual Q&AAnswer
Mar 15, 2025 - 01:40 AM
To install the Mr. Steam 104318 Sauna Bath caddy, follow these steps:
1. Locate a suitable location for the caddy that allows for visual monitoring of the fragrance level and easy replacement of the fragrance container. Avoid installing the caddy in areas accessible to children and make sure it is installed below the pump, with a maximum distance of 6 feet from the pump to the bottom of the caddy. The caddy should be installed indoors and not in an unheated location where water could freeze. The ambient temperature should not exceed 88˚ F.
2. If mounting the caddy on a wall, use a level to ensure it is level. Secure the caddy using the two mounting screws provided, using the two holes at the top of the caddy. Use anchors or other hardware as required for secure mounting. Test the caddy for secure mounting.
3. If mounting the caddy on a floor, use the two mounting screws provided to secure the caddy using the two holes at the bottom of the caddy. Use anchors or other hardware as required for secure mounting. Test the caddy for secure mounting.
4. Insert the fragrance container into the caddy with the label facing outward so it is visible through the caddy window. The label contains important information.
5. Connect the fragrance container to the pump according to the instructions in the AromaSteam Fragrance Dispensing Pump Installation, Operation Manual (PUR 100402).
6. Always keep the fragrance container in the caddy while it is connected to the dispensing pump.
Important Note: Using a fragrance container that is not secured in the caddy or using a caddy that is not mounted may result in spillage, excessively strong vapors, or a fire hazard.
Please refer to the Mr. Steam 104318 Sauna Bath Installation Guide for detailed diagrams and further instructions.
Add New Comment