Answer

Mar 15, 2025 - 12:37 AM
To install and set up the GE Lighting 82093 Color Effects LED Spiral Tape Light Tree, please follow these steps:
1. Before installation, carefully inspect the product for any damage or frayed wires. Discard any products with damaged wires or components.
2. Choose a suitable location for the light tree, either indoors or outdoors. Ensure that the area is free from any flammable materials and is not near heat sources such as heaters, fireplaces, or candles.
3. Plug the DC adapter (24V DC, 36W) into a standard 120V AC 60 Hz power outlet. Make sure the power rating of the adapter does not exceed 108 watts.
4. Unroll the spiral tape light tree and position it in the desired location. Avoid installing it on trees with needles, leaves, or branch coverings made of metal or metal-like materials.
5. Do not mount or support the strings in a way that can cut or damage the wire insulation.
6. Connect the spiral tape light tree to the DC adapter. Ensure a secure connection.
7. Once connected, the lights should illuminate. Use the included remote control to select different lighting effects and colors.
8. When leaving the house, retiring for the night, or if left unattended, always unplug the product for safety.
9. Do not hang ornaments or other objects from the cord, wire, or .
10. When storing the product, carefully remove it from trees, branches, or bushes to avoid strain on the conductors, connections, and wires. Store the product neatly in a cool, dry location protected from sunlight.
For further assistance or questions, you can contact GE Lighting customer service at 1-877-398-7337 or visit their website at www.geholidaylighting.com.
Please refer to the provided user guide for additional safety instructions and information.
Add New Comment