Answer

Mar 15, 2025 - 12:21 AM
To replace a blown fuse in the GE Lighting 71026-0.14 21L JEWEL STAR, follow these steps:
1. Make sure the set is unplugged before changing fuses.
2. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
3. Using a flathead screwdriver, open the fuse cover. Slide open the fuse access cover on top of the attachment plug towards the blades.
4. Remove the blown fuse carefully.
5. Replace the fuse only with a 3 Amp, 125 Volt fuse (provided with the product). Using a different type of fuse may pose a risk of fire.
6. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug. Make sure the door is fully closed and the fuses are completely covered.
7. It is important not to replace the attachment plug as it contains a safety device (fuse) that should not be removed. If the attachment plug is damaged, discard the product.
Please refer to the user guide for visual instructions and additional safety precautions.
Add New Comment