User Manual Q&AAnswer
Mar 15, 2025 - 12:17 AM
To replace a blown fuse in the GE Lighting 97775 Energy Smart LED C-9 Lights, follow these steps:
1. Always unplug the product from the receptacle or other outlet device before installing or replacing a fuse.
2. Firmly grasp the plug to unplug. Do not unplug by pulling on the cord.
3. Open the fuse cover located on the side of the attachment plug. The cover can be opened by pushing it towards the blades.
4. Carefully remove the blown fuse by turning the plug over.
5. Replace the blown fuse only with a 3 Amp, 125 Volt fuse (provided with the product).
6. Close the fuse access cover on top of the plug.
7. Plug the product back into the outlet and check if it is functioning properly.
Note: If the replacement fuse blows again, there may be a short-circuit present, and the product should be discarded.
Add New Comment