User Manual Q&AAnswer
Mar 15, 2025 - 12:04 AM
To install the HILTI HST2 BW Wedge Anchor, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Preparing the hole:
- Drill a hole into the base material using the appropriate diameter and depth specified in the manual.
- Clean the hole from any debris using a brush or compressed air.
2. Inserting the anchor:
- Insert the anchor into the hole, making sure it is fully seated.
- Ensure that the anchor is oriented correctly, as indicated in the manual.
3. Setting the anchor:
- Using a hammer or a setting tool, strike the anchor's head until it is flush with the surface of the base material.
- Make sure to strike the anchor evenly and avoid excessive force to prevent damage.
4. Verification:
- After setting the anchor, visually inspect it to ensure it is properly installed.
- Check that the anchor is flush with the surface and securely embedded in the base material.
For more detailed instructions and safety precautions, please refer to the HILTI HST2 BW Wedge Anchor Instruction Manual (2108174-07.2022). It provides comprehensive information on installation, including tool requirements, dimensions, and additional guidelines to ensure proper usage and performance.
Add New Comment