Answer

Mar 14, 2025 - 11:54 PM
To install the RICE LAKE LaserLight3 Wi-Fi Module, follow these steps:
1. Disconnect the LaserLight3 power cable from the power outlet.
2. Open the LaserLight3 enclosure.
3. Insert the Wi-Fi module in option slot J12 on the CPU board.
4. Secure the Wi-Fi module with the included M2 xxxx .
5. Unscrew the antenna hole xxxx plug from the bottom of the enclosure and collect the nut and washer inside the enclosure.
6. Remove the nut and tooth washer from the antenna jack.
7. Inside the enclosure, insert the threaded antenna jack into the antenna hole.
8. From the bottom of the enclosure, install the washer and nut (previously removed in Step 6) on the end of the antenna jack.
9. Thread the antenna onto the antenna jack.
10. Attach the antenna extension cable to the Wi-Fi Module U.FL connector closest to the Wi-Fi module mounting xxxx .
11. Close the LaserLight3 enclosure.
12. Connect the LaserLight3 power cable to the power outlet.
Please refer to the RICE LAKE LaserLight3 Wi-Fi Module Installation Guide for more detailed instructions and illustrations.
Add New Comment