User Manual Q&AAnswer
Mar 14, 2025 - 11:38 PM
To adjust the cutting height on the TEXAS 4010 Razor lawnmower, follow these steps:
1. Locate the cutting height adjustment lever or wheel on the lawnmower. It is usually located near the wheels or on the cutting deck.
2. Depending on the model, there may be different positions or holes to choose from for adjusting the cutting height. Refer to the user manual or look for markings on the lever or wheel indicating the different height options.
3. Select the desired cutting height by moving the lever or turning the wheel to the corresponding position. The cutting height options are typically measured in millimeters or inches.
4. Make sure that all four wheels are set to the same cutting height for an even cut.
5. Once the desired cutting height is set, tighten any locking mechanisms or levers to secure the adjustment.
Note: It is recommended to adjust the cutting height before starting the lawnmower and while the engine is off. Always refer to the user manual for specific instructions and safety precautions related to adjusting the cutting height on your TEXAS 4010 Razor lawnmower.
Add New Comment