User Manual Q&AAnswer
Mar 14, 2025 - 11:32 PM
To assemble the Best Quality Furniture 9749 Venetian 5-Piece Champagne California King Bedroom Set, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Start with the dresser:
- Attach the bun foot (B) to the bottom of the dresser (A) as shown in the diagram.
- Secure the metal leg (C) to the bottom of the dresser (A) as shown in the diagram.
- Secure the center leg (D) to the bottom of the dresser (A) as shown in the diagram.
2. For anti-tipping safety:
- Attach the bracket (A) to the dresser using the long xxxx (C) and short xxxx (D), and secure it with a tie wrap (B).
3. Moving on to the king headboard:
- Attach the extension post (B) to the headboard (A) as shown in the drawing, using the provided hardware (JCBC 40mm, M6 spring washer, M6 flat washer).
4. For the cal king bed with 14 slats:
- Attach the bun foot (L) to the bottom of the footboard (B).
- Attach the side rail (C) to the headboard (A) and footboard (B).
- Attach the drawer support rail (K) to the side rail (C) using the provided hardware (JCBC 16mm, M6 spring washer, M6 flat washer).
- Attach the drawer base panel (E) to the footboard (B) using the provided hardware (JCBC 35mm, M6 spring washer, 1/4" flat washer).
- Attach the drawer support leg (H) to the drawer support rail (K) using the provided hardware (JCBC 35mm, M6 spring washer, M6 flat washer).
- Attach the roll slat (F) to the footboard (B) using screws (32mm).
- Attach the slat support leg (G) and center vertical slat (J) to the roll slat (F) using the provided hardware (JCBC 60mm, M6 spring washer).
- Attach the slat cover panel (I) to the slat close to the footboard using the provided xxxx (16mm).
- Attach the slat support leg (long) (O) to the slat (N) using the provided hardware (JCBC 35mm, M6 spring washer).
- Attach the slat cover panel (I) to the slat close to the footboard using the provided xxxx (16mm).
- Attach the top cap (M) to the side rail (C) using the provided hardware (JCBC 45mm, M6 spring washer, M6 flat washer).
5. For the dresser and mirror:
- Place the mirror (B) on top of the dresser (A) and align it to the center. Secure it using the provided hardware (JCBC 35mm, M6 spring washer, 1/4" flat washer).
6. For the nightstand:
- Attach the bun foot (B) to the bottom of the nightstand (A).
- Attach the metal leg (C) to the bottom of the nightstand (A).
7. For anti-tipping safety:
- Attach the bracket (A) to the nightstand using the long xxxx (C) and short xxxx (D), and secure it with a tie wrap (B).
Please refer to the instruction manual for more detailed diagrams and instructions.
Add New Comment