Answer

Mar 14, 2025 - 11:28 PM
To clean the ritter icaro 5 Food Slicer, follow these steps:
1. Switch off the appliance and unplug it from the socket.
2. Turn the slice thickness adjustment xxxx to the "0" position to cover the sharp rotating blade.
3. Remove the left-over holder and finger protection from the appliance.
4. Remove the slice carriage by unlocking it and lifting it out of the appliance.
5. Remove the rotary blade by following the instructions in the manual.
6. Wipe down the housing and all removed parts, including the rotary blade, with a damp cloth.
7. For occasional cleaning, wash all removed parts, including the rotary blade, in warm soapy water. Do not use the dishwasher.
8. Clean the housing behind the blade using a dry cloth or brush. Avoid using abrasive cleaners or rough sponges.
9. Dry all parts thoroughly before reassembling.
10. Grease the rotary blade's gear wheel with a little ritter maintenance grease or Vaseline.
11. Fit the rotary blade back into the appliance and slide the slice carriage back onto its rails.
Note: Regular cleaning is important to prevent the accumulation of food residue and rust on the rotary blade. Refer to the manual for more detailed instructions on cleaning and maintenance.
Add New Comment