How do I set up the YESKAMO Wireless Security Camera System? (YESKAMO Wireless Security Camera System User Guide)

Answer

manuals.plus

Mar 14, 2025 - 04:50 AM

To set up the YESKAMO TJ15-10804-2T Wireless Security Camera System, follow these steps:

1. Plug the camera and monitor into power sockets using the provided adapters.
2. Connect the WAN port of the monitor to the LAN port of your router using an Ethernet cable (if you want remote viewing on your phone app).
3. Connect a mouse to the monitor.
4. Optional: If you want to connect an extra TV or monitor, use an HDMI cable to connect the monitor to the TV/monitor.
5. Turn on the monitor and enter the username "admin" and leave the password blank to log in to the camera system.
6. Note: The laptop cannot be used as a monitor directly. Use a TV or desktop monitor for local viewing.
7. Ensure that the monitor is in ONLINE status by connecting it to the router. Right-click the mouse and go to the main menu > Fast Network > Cloud (P2P) > ONLINE.
8. Download the free "YESKAMO" app from the App Store or Google Play and create an account.
9. Add the Cloud ID of the camera to the app by scanning the Cloud ID or entering it manually.
10. Customize the system name, username, and password in the app to match the NVR monitor.
11. To remotely view the cameras on your phone, double-tap the screen in the app.
12. To enable two-way audio communication, turn on the "speaker" button in the app to hear audio from the camera side and tap the "microphone" button to talk back to the camera side.
13. To enable the siren alarm from the camera side, go to the main menu > system setup > channel setup > video detection > select channel > enable "IPC Alarm" and click "Apply" to save the setting.
14. To manually turn off the floodlight at night, go to the main menu > Color Adjust > IR-Cut mode and select "Infrared" or "Night" mode.
15. To add a new camera to the YESKAMO NVR with the monitor, connect the camera to the monitor using an Ethernet cable, right-click the mouse, go to the main menu > Video Manage > click "Search" and then "Match Code" to pair the camera with the monitor.
16. To install a hard drive for the monitor, remove the screws on the back panel of the monitor, line up the holes on the hard drive with the monitor panel, xxxx in the provided screws, and connect the SATA power and data cables from the monitor to the hard drive.

For more detailed information, please refer to the full user manual provided with the product.