User Manual Q&AAnswer
Mar 14, 2025 - 04:36 AM
To configure the tone and sound power of the ESB 1011 Addressable Sounder Base, you can use the inner DIP switches or the control panel during the programming phase. The device allows you to select different signals for different situations.
Here are the steps to configure the tone and sound power using the inner DIP switches:
1. Refer to the labels in the appendix of the instruction manual to see the list of tones available.
2. Locate the DIP switches on the ESB 1011 Addressable Sounder Base.
3. Use a small tool, such as a screwdriver, to adjust the positions of the DIP switches.
4. Each DIP switch corresponds to a specific tone or sound power setting.
5. Consult the manual to determine the desired DIP switch positions for the desired tone and sound power.
6. Adjust the DIP switches accordingly to select the desired tone and sound power.
Alternatively, you can also configure the tone and sound power using the control panel during the programming phase. Please refer to the control panel's instruction manual for detailed instructions on how to program the ESB 1011 Addressable Sounder Base.
Note: It is important to follow the instructions provided in the manual and consult with a professional if you are unsure about any configuration settings.
Add New Comment