User Manual Q&AAnswer
Mar 14, 2025 - 04:11 AM
To pair the Herelink Air Unit and Controller, follow these steps:
1. Power on and unlock the Controller. A warning message will be displayed on the screen.
2. Within 30 seconds, long press the Pair/Reset button on the Air Unit for 3 seconds. The Pair/Reset button is located on the Air Unit.
3. Wait and observe the QGC (QGroundControl) on the Controller side. If the pairing is successful, a message saying "Calibrate Succeed" will pop up. Click "OK" to complete the code-matching process. If a message saying "Calibrate Failed" pops up, please restart the process and try again.
Note: If you need to re-pair the Air Unit and Controller, follow these additional steps:
1. Click on the "Q" icon on the Controller.
2. Click on "D2D Info" to enter the pairing UI.
3. Click on "Calibrate" to start the re-pairing process.
4. Repeat steps 2 and 3 of the initial pairing process.
Please refer to the user manual for more detailed information and illustrations on the pairing process.
Add New Comment