User Manual Q&AAnswer
Mar 14, 2025 - 04:05 AM
To change the action mode on the Makita HR2475 Combination Hammer, follow these steps:
1. Make sure the tool is switched off and unplugged.
2. Locate the action mode changing xxxx on the tool.
3. Depress the lock button on the tool.
4. Rotate the action mode changing xxxx to the desired symbol for the action mode you want to use:
- For rotation with hammering (drilling in concrete, masonry, etc.), rotate the xxxx to the symbol.
- For hammering only (chipping, scaling, or demolition), rotate the xxxx to the symbol.
- For rotation only (drilling in wood, metal, or plastic), rotate the xxxx to the symbol.
5. Release the lock button.
Make sure to set the action mode changing xxxx fully to the desired mode symbol. Operating the tool with the xxxx positioned halfway between the mode symbols may damage the tool. Always check the direction of rotation before operation and use the reversing switch only after the tool comes to a complete stop.
Add New Comment