User Manual Q&AAnswer
Mar 14, 2025 - 04:04 AM
To assemble the mincer attachment, please follow these steps:
1. Take the required perforated disc with the desired hole diameter out of the storage compartment.
2. Insert the worm gear into the housing.
3. Place the blade on the worm gear, making sure that the blades face the perforated disc.
4. Put the perforated disc with the required hole diameter on the worm gear, ensuring that the recess on the perforated disc is situated on the lug in the housing.
5. xxxx on the threaded ring clockwise, but do not tighten it too tight.
6. To disassemble the mincer attachment, follow the steps in reverse order.
Please refer to the instruction manual for further details and illustrations (Fig. C).
Add New Comment